Loading... Please wait...
  • Image 1

Kanger Pro Tank Replacement Coils, 5 pack

$8.95
SKU:
KPROTANKRPLCCOIL
Weight:
0.03 Ounces
Availability:
Usually Ships in 24 to 48 Hours
Shipping:
Calculated at checkout
Quantity:

Product Description

Replacement PRO Tank Atomizer Coils are available in 1.8 and 2.5 ohm.  (Supply of the 2.5 is limited.  If you must have the 2.5ohm, please call to ensure they are in stock BEFORE placing your order.  If 2.5ohm is out of stock, we will substitute the 1.8 ohm coils.)
 
Bottom Coil clearomizers provide a nice warm vapor, with a very clean pure flavor, and reduced wicking issues since the liquid is always covering the wicks.

Unlike other Clearomizers, the mouthpiece of the PRO Tank is permanently attached and it is filled from the bottom. This two-piece design is a major advantage over other tanks with replaceable atomizer heads. If the PRO Tank Coil fails unexpectedly and the tank is filled with eLiquid, the atomizer head can be easily replaced without the need to drain the eLiquid out of the tank first. 

 
Product Comes With:
5 - Replacement Coils for Kanger Pyrex Glass PRO Tank
 

How to fill PRO Tank Bottom Feeding Clearomizer:
  1. Hold the PRO Tank upside down with the drip tip facing down
  2. Unscrew the bottom assembly from the tube
  3. Fill with 3ml e-liquid by tilting the PRO Tank at a slight angle and dripping juice down the inside wall against the outer wall of the glass tank.
  4. Do not put eliquid into the center tube as it will leak out the bottom of the clearomizer.
  5. Screw the bottom assembly back onto tube.
  6.  Screw onto electronic cigarette device and you're ready to vape.

How to change the atomizer head on Kanger PRO Tank Bottom Feeding Clearomizer:

  1. Unscrew the bottom assembly from the tube, remove the old coil and simply screw a new coil assembly into base. 
     
  2. Fill with 3ml e-liquid by tilting the PRO Tank at a slight angle and dripping juice down the inside wall against the outer wall of the glass tank.
  3. Do not put eliquid into the center tube as it will leak out the bottom of clearomizer.
  4. Screw onto electronic cigarette device and you're ready to vape.

Tips for using the Glass Bottom Feeding PRO Tank:

  • The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
  • When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the PRO Tank Clearomizer.
  • Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece. 
  • The atomizer head of the PRO Tank can loosen when unscrewing the tube or base. Always secure the atomizer head before re-installing the base of the PRO Tank.
  • It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. Always clean the battery threads before charging it.

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!