Loading... Please wait...
  • Image 1
  • Image 2

Kanger eVod

$7.99
SKU:
KEVODTANK
Weight:
0.04 Ounces
Availability:
Usually Ships in 48 to 72 Hours
Shipping:
Calculated at checkout
Quantity:

Product Description

These are the same bottom feeding design as the MT3 Clearomizer except they are more compact and the coil is upgraded to allow replacing just the coil and not the entire threaded end. Being able to replace just the coil means cost savings that we're able to pass directly to you.
 
Fits all our eGo e Cig products and come blank ready to fill with your favorite liquid! No syringe needed to fill, just screw the bottom off, fill with your favorite premium eLiquid, screw the bottom back on and you're ready for the best vaping experience ever. The advantage of bottom feeding clearomizers is the atomizer is at the bottom which is where the liquid stays when you vape, meaning the wick is always wet. The Kanger EVOD Bottom Feeding Clearomizer is easy to fill, produces great flavor and vapor with no worries of leaking or burnt wick taste.
 
Holds 1.6ml of e juice. This is a must have for serious vapers!
 
Replacement EVOD Coils are available in 1.8ohm, 2.2 ohm, and 2.5ohm. If you're using a standard 3.7v eGo Battery any ohm will work, if you are using an eGo Variable Voltage Battery or a Higher Voltage Device the 2.5ohm is the best option for you.
 
Bottom Coil Clearomizers provide a nice warm vapor with a very clean, pure flavor and reduced wicking issues since the liquid is always covering the wicks.

Unlike other Clearomizers, the mouthpiece of the EVOD is permanently attached and it is filled from the bottom. This two-piece design is a major advantage over other tanks with replaceable atomizer heads. If the EVOD atomizer head fails unexpectedly and the tank is filled with eLiquid, the atomizer head can be easily replaced without the need to drain the eLiquid out of the tank first.

 
Product Comes With:
1 - EVOD Clearomizer Metal Tube Assembly with Drip Tip
1 - Bottom assembly with 2.5ohm Atomizer Head Installed
Comes assembled ready to fill with you favorite eLiquid
 
** Please Note: These are designed to screw onto the outer eGo type threads not into a 510 thread connector. If you are using with a 510 female connector you will need to purchase and eGo to 510 adapter.
 

How to fill EVOD Bottom Feeding Clearomizer:
  1. Unscrew the bottom assembly from the tube
  2. Hold the EVOD tube upside down with the drip tip facing down
  3. Fill with 1.6ml e-liquid by tilting the clearomizer at a slight angle and dripping juice down the inside wall against the outer wall of clearomizer .
  4. Do not put eliquid into the center tube as it will leak out the bottom of clearomizer.
  5. Screw the bottom assembly back onto tube.
  6.  Screw onto electronic cigarette device and you're ready to vape.

How to change the atomizer head on EVOD Bottom Feeding Clearomizer:

  1. Unscrew the bottom assembly from the tube and remove the atomizer head and replace with a new head. 
  2. Fill with 1.6ml e-liquid by tilting the clearomizer at a slight angle and dripping juice down the inside wall against the outer wall of clearomizer.
  3. Do not put eliquid into the center tube as it will leak out the bottom of clearomizer.
  4. Screw onto electronic cigarette device and you're ready to vape.

Tips for using the EVOD:

  • The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
  • When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the EVOD Clearomizer.
  • Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.
  • The atomizer head of the EVOD can loosen when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base of the EVOD.
  • It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. We recommend cleaning the battery before charging it.
  • EVOD Atomizer heads have an average lifespan of between 10 to 20 days. When the atomizer head wears down, it may begin to leak.
 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!