Kangertech Cupti 2 "All In One" starter kit includes 30 ML of GC Juice
Kanger CUPTI 2 All-in-One Starter Kit
The Kanger CUPTI 2 is an All-In-One device similar to the Aspire Plato and Kanger NEBOX that is designed for both mouth to lung and direct lung vapers. The Kanger CUPTI 2 features a large 5.0ml built-in tank that utilizes the acclaimed leak resistant cup design to help minimize leaks. The Kanger CUPTI 2 can fire up to 80 watts and supports Nickel 200, Titanium and Stainless Steel atomizers in temperature control mode. The Kangertech CUPTI 2 supports the CLOCC atomizer heads and includes (1) SS316L 0.5ohm atomizer head for direct lung users. The Kanger CUPTI also features an adjustable airflow valve located right under the mouth piece for maximum airflow.
The included 510 tank adapter allows you to use your favorite tank or dripper with the CUPTI 2. The Kanger CUPTI requires (2) high amp 18650 batteries (sold separately) and is easily replaced using the bottom battery door which is easily locked and unlocked. The CUPTI 2 has a micro USB port for charging and future firmware updates. All you require is batteries and e-Liquid and you are ready to start vaping!
Features and Specs:
Dimensions: 4-1/8" x 2" x 1-5/8"
All in One Design
Includes 510 Tank Adapter
Temperature Control for Nickel 200, Titanium and Stainless Steel
Operating Wattage: 5.0 - 80.0 W
Temperature Range: 100 - 315C / 200-600F
Resistance Range: 0.1 - 2.5ohm
Top Adjustable Airflow Valve
Leak Resistant Cup Design
OLED Display Screen
Durable Surface Finish
Zinc and Aluminum Alloy Construction
510 Drip Tip Compatible
Micro USB Charging Port
Utilizes (2) High Amp 18650 Batteries (Sold Separately)
Utilizes Kanger CLOCC Atomizer Heads
Includes 1 x CLOCC SUS316L 0.5ohm Atomizer Head (Pre-Installed) for Direct Lung Users
This product will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.
Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.
NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.
This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A or higher. Using other batteries can be potentially hazardous.
Warning: This tank uses sub-ohm resistance coils. This tank should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.
gcvapors.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.
1 x Kanger CUPTI 2 1 x 510 Tank Adapter 1 x Preinstalled CLOCC SS316L 0.5 ohm Coil 1 x Micro USB Cable